Asphalt helps lithium batteries charge faster

A touch of asphalt may be the secret to high-capacity lithium metal batteries that charge 10x to 20x faster than commercial lithium-ion batteries, according to Rice University scientists.

Rice chemist James Tour’s lab developed anodes comprising porous carbon made from asphalt that showed exceptional stability after more than 500 charge-discharge cycles. A high-current density of 20mA/cm² demonstrated the material’s promise for use in rapid charge and discharge devices that require high power density. The finding is reported in the American Chemical Society journal ACS Nano.

“The capacity of these batteries is enormous, but what is equally remarkable is that we can bring them from zero charge to full charge in five minutes, rather than the typical two hours or more needed with other batteries,” Tour says.

The Tour lab previously used a derivative of asphalt – untreated gilsonite, the same type used for the battery – to capture greenhouse gases from natural gas. This time, the researchers mixed asphalt with conductive graphene nanoribbons and coated the composite with lithium metal through electrochemical deposition.

The lab combined the anode with a sulfurized-carbon cathode to make full batteries for testing. The batteries showed a high-power density of 1,322W/kg and high-energy density of 943Wh/kg.

Testing revealed another significant benefit: The carbon mitigated the formation of lithium dendrites. These mossy deposits invade a battery’s electrolyte. If they extend far enough, they short-circuit the anode and cathode and can cause the battery to fail, catch fire, or explode.

The asphalt-derived carbon prevents any dendrite formation. An earlier project by the lab found that an anode of graphene and carbon nanotubes also prevented dendrite formation.

“While the capacity between the former and this new battery is similar, approaching the theoretical limit of lithium metal, the new asphalt-derived carbon can take up more lithium metal per unit area, and it is much simpler and cheaper to make,” Tour says. “There is no chemical vapor deposition step, no e-beam deposition step, and no need to grow nanotubes from graphene, so manufacturing is greatly simplified.”

Rice graduate student Tuo Wang is lead author of the paper. Co-authors are Rice post-doctoral researcher Rodrigo Villegas Salvatierra, former post-doctoral researcher Almaz Jalilov, now an assistant professor at King Fahd University of Petroleum and Minerals, Dhahran, Saudi Arabia, and former Rice research scientist Jian Tian, now a professor at Wuhan University, China. Tour is the T.T. and W.F. Chao Chair in Chemistry as well as a professor of computer science and of materials science and nanoengineering at Rice.

The Air Force Office of Scientific Research, EMD-Merck, and Prince Energy supported the research.

www.rice.edu